27 Parts of Tank and Their Uses [With Diagram, Pictures & Names]

27 Parts of Tank and Their Uses [With Diagram, Pictures & Names]
Parts of Tank


27 Parts of Tank and Their Uses [With Diagram, Pictures & Names]: – A country’s defense sector acts like its backbone, the more robust the defense sector is, the more powerful a country is thought of. In the world of Tanks, the external appearance of each tank will vary in view of tank type and nation. A few tanks might try and have parts that aren’t tracked down on different tanks. Each tank is composed of a similar basic set of components. The placement of explicit parts might vary between tanks, however, most tanks share a similar overall structure.

What is a Tank?

A tank is a tracked armored fighting vehicle, designed and intended to engage forces by the utilization of direct fire. Each tank is competing for prevalent capability, versatility, and strength, however these characteristics alone never again figure out which tanks are the most advanced in the world. A tank is equipped or furnished with heavy weapons and Armour, as well as a high degree of mobility that allows it to cross rough landscapes at somewhat high speeds. While tanks are strong battling machines, they now and again work or operate alone, being coordinated or facilitated into armored units in combined arms forces.

Tanks are likewise in a difficult spot in wooden terrain and urban conditions, which drop the upsides of the tank’s long-range capability, limit the crew’s ability to detect potential threats, and might restrict the turret’s ability to traverse or navigate. The entire purpose of the tank is to convey the primary gun into battle. Tanks should have the option to move rapidly over the combat zone to carry our lethality and survivability assets to bear.

Parts of Tank

Below we discuss the different parts of the Tank: –

  1. Caterpillar Tracks
  2. Tracks
  3. Road Wheels
  4. Return Rollers
  5. Drive Sprocket
  6. Idler
  7. Suspension
  8. Fender
  9. Engine, Fuel Tank, Transmission
  10. Internal Combustion Engine
  11. Glacis Plate
  12. Hull
  13. Turret
  14. Turret Ring
  15. Escape Hatch
  16. Modules
  17. Observation Device
  18. Radio
  19. Periscope
  20. Lifting Hooks
  21. Smoke Launcher
  22. Ammunition Rack
  23. Gun Mantlet
  24. Coaxial Machine Gun
  25. Gun
  26. Fume Extractor
  27. Muzzle Brake

1. Caterpillar Tracks: ( Parts of Tank )

Caterpillar tracks work on a similar principle as a conveyer belt. The tank engine rotates at least one steel sprocket, which moves a track comprised of many metal links. The tank’s wheels ride along the moving track, very much like the wheels in a car run along the road. Prior to tracking vehicles weren’t practical in fighting in battle, light of the fact that their steam engines were excessively cumbersome and unreliable.

2. Tracks: ( Parts of Tank )

Tank tracks, or constant tracks were developed at first for ranch and logging applications, for heavy vehicles that were expected to operate in soft terrain. Damaging the drive wheels makes the tank become tracked, immobilizing the vehicle until the tracks are fixed or repaired. The tracks may likewise have a “skirt” of spaced armor covering them for added protection. Tanks will appear to be unique relying upon the situation of its smaller parts all through these sections. Tracks forestalls it from sinking in regions where wheeled vehicles of a similar weight would sink.

3. Road Wheels: ( Parts of Tank )

These free-turning wheels on vigorously sprung axles are the main component of the suspension. They permit the vehicle to move flawlessly over landscapes.

4. Return Rollers: ( Parts of Tank )

They convey the track above road wheels as it returns from the idler to the drive sprocket. Return rollers are utilized in tank track systems or frameworks to assist with directing and planning the track and diminishing wear on the essential drive sprocket teeth.

5. Drive Sprocket: ( Parts of Tank )

The drive sprocket connects or associates the engine by means of the transmission and drive train. The sprocket on each side can be driven freely, which causes the vehicle to turn.

6. Idler: ( Parts of Tank )

The idler wheels on a tank keep tension on the track. A free-turning wheel at the furthest end of the suspension from the drive sprocket. Contingent upon its design, Idler wheels will in general be moved to change or adjust track tension. The location of idler wheel varies in the event that the tank is front or rear drive.

7. Suspension: ( Parts of Tank )

The suspension permits the tank tracks to function. Damaging the suspension can reduce or decrease a tank’s mobility, and destroying or obliterating the suspension or drive wheels can totally immobilize the vehicle.

8. Fender: ( Parts of Tank )

They are the extensions, often thin sheet metal, found over the tracks. It protects tanks from damaging each other when they collide. To ensure high operational safety and reliability, they are pressure tested in controlled conditions under different levels of compression.

9. Engine, Fuel Tank, Transmission: ( Parts of Tank )

Most tanks have their engine located or situated in the rear part of the hull, alongside the fuel tank and transmission. There are, obviously, a few exemptions for this relying upon the tank. For instance, the 59-Patton has its fuel tank toward the front of the hull close to the driver. Damaging the engine can cause the tank to lose engine power, which slows down the tank and causes the tank to lose mobility. In the case of the fuel tank, if they are destroyed, it can cause the tank burst into flames, which will reduce the tank’s HP rapidly in the event that the player doesn’t have a fire extinguisher handy.

10. Internal Combustion Engine: ( Parts of Tank )

In an internal combustion engine (ICE), the ignition and combustion of the fuel happens inside the engine. The engine then, at that point, to some extent converts the energy from the combustion completely to work. The engine includes a fixed cylinder as well as a moving piston.  Tracked vehicles can move effectively over unpleasant territory in light of the fact that the track connects with a wide area of the ground.

11. Glacis Plate: ( Parts of Tank )

They are sloped front armor that increments protection and assurance against projectiles. Hence, the glacis plate is overall the thickest, most powerful armored part of a tank, trailed by the turret face and mantlet. The glacis plate is moreover the largest and most clear target that anyone could hope to find to a foe heavy weapons specialist.

12. Hull: ( Parts of Tank )

The main body of the tank is called a hull. The Driver sits inside the front of the hull, alongside the Radio operator. while the engine, fuel, and transmission are basically in the rear of the hull . A hull gives the tank its protection, speed, mobility, weight as well as its power. The three-sided armor plates on the front of the hull are the upper and lower glacis. The hull’s responsibility is to transport the top part of the tank, the turret, from one spot to another.

13. Turret: ( Parts of Tank )

A tank’s turret is a heavily or intensely shielded, dome-like structure on a tank connecting or interfacing the gun to the hull. The turret sits on the hull and can normally turn in the event that the turret isn’t fixed to the hull. A few smaller parts should be visible on the turret too, like the periscope, hatch, and cupola. A large portion of the crew sits inside the turret basket (ordinarily the commander, gunner, and Loader). The turret is armored to safeguard its internal crew.

14. Turret Ring: ( Parts of Tank )

The opening where the turret meets the hull is called a turret ring.  There will be reduction in the movement speed of the turret, if there will be any kind of damage to the turret at turret ring. Destroying or annihilating this spot can block or obstruct the turret, causing it to become stuck and incapable of turning. You want to focus on the crease where the turret meets the hull structure to fire at a tank,s turret ring of an enemy during the battle.

15. Escape Hatch: ( Parts of Tank )

They are typically found on the back, base, or sides of a tank, this small hatch or trapdoor permits the crew to get away from fire in an onslaught at the time of emergency.

16. Modules: ( Parts of Tank )

A module is a part of the gear for your tank. Damaging specific modules can essentially hinder a tank during battle, so it’s critical to have an overall idea of where these modules are located or situated on a tank regardless of whether they aren’t externally visible.

17. Observation Device: ( Parts of Tank )

Tanks have an optical periscope or one more observation gadget utilized for spotting. Damaging this gadget can reduce or diminish the tank crew’s general spotting and view range. This is normally tracked down on the turret or close to the front of the tank.

18. Radio: ( Parts of Tank )

The radio assists in communicating the location of enemies to your teammates who are within the range of radio. Damaging the Radio operator will influence the tank’s signal range and ability to communicate enemy locations. Radio operators commonly sit inside the front of the hull close to the Driver.

19. Periscope: ( Parts of Tank )

The functional capability of periscope is that they enable or empower drivers, commanders of tank, and other vehicle occupants to review what is going on through the vehicle rooftop.

20. Lifting Hooks: ( Parts of Tank )

Lifting hooks or snares has a fundamental impact in holding as well as grabbing the objects. The tanks have hooks or snares to lift heavy and weighty parts like engine cover or the entire turret.

21. Smoke Launcher: ( Parts of Tank )

Smoke launchers are usually used by infantry to conceal their movement in areas of enemy fire. A short-range mortar is used to toss smoke grenades and create a smoke screen. The smoke launcher fires smoke bombs that detonate on any kind of impact.

22. Ammunition Rack: ( Parts of Tank )

Ammunition racks are regularly located either at the rear of the turret or within the frame on the side. Destroying or Obliterating the ammunition rack can cause the entire tank to explode, so you’ll need to keep your tank’s ammunition rack out of danger during battle.

23. Gun Mantlet: ( Parts of Tank )

A mantlet is the thick, protective steel frontal shield, typically able to elevate and push down, which houses the fundamental weapon on an armored tank.The gun mantlet is the best-protected piece of the turret.

Numerous designs of s mantlet were directly attached to the gun, it radically expanded the weight of the entire gun system and the amount of effort required to elevate and push down it.

24. Coaxial Machine Gun: ( Parts of Tank )

A Coaxial machine gun is an automatic or programmed weapon which are mounted on light and heavy tanks. They are very powerful as well as effective against infantry and light vehicles. This permits the machine gun to be aimed by utilization of the primary gun control.

25. Gun: ( Parts of Tank )

The barrel that sticks out from the turret is the tank’s gun and fills in as its essential weapon. This will typically be a high-caliber gun. Certain tanks may likewise have a coaxial gun or automatic machine gun mounted in the turret too, yet these are not usable in the world of Tanks. There’s no real method or technique for destroying the gun itself in the realm of Tanks, but you can aim to damage the turret, the turret ring, or the internal crew in light of everything.

26. Fume Extractor: ( Parts of Tank )

A fume extractor is a framework or system that uses a fan by utilizing a negative draft to move or maneuver fumes and buildup particles into a contained filtration system. The fume extractor prevents poisonous fumes from reaching the fighting compartment.

27. Muzzle Brake: ( Parts of Tank )

It lessens the gun’s recoil and guides the vast majority of the impact to the sides, decreasing the dust kicked up, which would obscure the gunner’s vision for the following shot.


To increase your battle performance and gain prevalence in the battle, train your crew, apply consumables, and install extra equipment on your vehicle. It is assumed that a few skills and perks, consumables, and additional equipment are generally suitable and correspond to the selected vehicle type. Nothing unexpected that tanks from just about are colossally popular modeling subjects. There are a number of various kits that are accessible. Also, assuming you like to build model tanks, you might have considered what either part is called.

Damaging and obliterating enemy tanks requires an understanding of how the tank is structured, the kind of armor it has, and the accuracy of your own tank. Now that you know the essential life systems of a tank as discussed above, you ought to have a superior idea of where to aim at an enemy and which parts you ought to keep safeguarded in the world of Tanks. At last, divesting in tanks isn’t a mandate on the value of tanks, however a consideration of their overall value to different platforms.

Image Source: – defensenews

You may also like...